Showing 46–54 of 60 results

  • Hobbyweld 15 Original (MIG)

    • 83% Argon, 15% Carbon Dioxide, 2% Oxygen
    • Cylinder Height: 840mm
    • Cylinder Diameter: 160mm
    • Approximate Weight: 13.7kg
    • One off Deposit Cost: £70

     

    As Hobbyweld 15 has been given the name ‘universal’ gas by customers, this shows that the gas can be used for many applications.

    This gas mix contains a higher CO2 content than the Hobbyweld 5 so offers combined benefits of good welding performance and minimal spatter make it very popular among the agricultural, on-site and mobile welding market.  This gas is used in structural steel work and general fabrication.

    Hobbyweld 15 is recommended for use with mild steel at a thickness of over 7mm. For thinner materials, please look at Hobbyweld 5.

  • Hobbyweld 5 Plus (MIG)

    • 93% Argon, 5% Carbon Dioxide, 2% Oxygen
    • Cylinder Height: 950mm
    • Cylinder Diameter: 200mm
    • Approximate Weight: 31.4kg
    • One off Deposit Cost: £110

    As the most popular MIG welding gas mix, there are an abundance of benefits Hobbyweld 5 can provide.

    This gas is simple to use and produces a stable arc which results in less spatter and clean up time for the end user, this makes it much more forgiving to the less gifted welder.

    Hobbyweld 5 provides good penetration and fusion, making this gas is an optimum choice for MIG welding. This gas is popular with vehicle restoration enthusiasts and provides the best weld quality for bodywork.

    This product is recommended for use with sheet or thin sections of mild steel at a thickness of less than 7mm. For thicker steel, please look at Hobbyweld 15.

  • Hobbyweld 5 Original (MIG)

    • 93% Argon, 5% Carbon Dioxide, 2% Oxygen
    • Cylinder Height: 840mm
    • Cylinder Diameter: 160mm
    • Approximate Weight: 13.7kg
    • One off Deposit Cost: £70

    As the most popular MIG welding gas mix, there are an abundance of benefits Hobbyweld 5 can provide.

    This gas is simple to use and produces a stable arc which results in less spatter and clean up time for the end user, this makes it much more forgiving to the less gifted welder.

    Hobbyweld 5 provides good penetration and fusion, making this gas is an optimum choice for MIG welding. This gas is popular with vehicle restoration enthusiasts and provides the best weld quality for bodywork.

    This product is recommended for use with sheet or thin sections of mild steel at a thickness of less than 7mm. For thicker steel, please look at Hobbyweld 15.

  • GYS Cutter 70 CT

    £1,950.00 (£2,340.00 inc. VAT)
    • 415v Three Phase
    • Made in France
    • 2 Years Warranty
    • Clean Cut 25mm
    • 22kg weight
    • Duty Cycle 70A @ 60%
    • Supplied with heavy duty MT-70 Torch

     

    Download Spec

  • GYS Cutter 45 CT

    £1,450.00 (£1,740.00 inc. VAT)
    • 110/240v Dual Voltage
    • 2 Years Warranty
    • Clean Cut 20mm
    • 14kg weight
    • Duty Cycle 41A @ 60%
    • Supplied with heavy duty MT-70 Torch

     

    Download Spec

  • GYS Easycut 40

    £750.00 (£900.00 inc. VAT)

    All our machines come fully tested, with input plug of your choice.

    • 240v
    • 2 Years Warranty
    • Max Cut 12mm, will handle 6-8mm all day long.
    • 8kg weight
    • Reinforced structure with isolated non slip rubber pads.
    • Both torch and earth clamp can be disconnected.
    • Compact, lightweight and portable
    • Inverter technology guarantees quality cutting on all types of steels
    • Quick and easy installation of consumables.
    • Effective cutting: air cooled torch body for a high arc stability and duty
      cycle.
    • Ergonomic handle for comfort and ease.
    • Designed to be shock and heat resistant.
    • Quick torch connection/disconnection, no tools required
    • Intuitive control panel.
    • Manual adjustment of the air pressure (2.5 < 6.5 bar) with a bargraph on the
      front panel.
    • Automatic torch detection.
    • HF-free ignition to prevent disturbances that could damage
      nearby electronic equipment

    Download Spec Sheet

  • Kemper-Profimaster 2 arm

    Kemper Profimaster – Double Arm

    £2,900.00£3,200.00
    • Two exhaust arms
    • High capacity filter
    • Low to medium levels of smoke and dust
    • For two work places
    • Safe operation by rotation field control
    • Maintenance door allows easy filter change
    • Exhaust arm requires less adjustment due to
    • Increased safety due to filter monitoring
    • Space-saving solution due to two extraction arms
    • Possibility of working in two alternating places due to
      dampers in the extraction hood

    Download spec

  • Kemper-profimaster_1_arm

    Kemper Profimaster – Single Arm

    £2,200.00£2,340.00
    • Robust quality
    • High capacity filter
    • Also suitable for high-alloy steel
    • Low to medium levels of smoke and dust
    • Safe operation by rotation field control
    • Maintenance door allows easy filter change
    • Exhaust arm requires less adjustment due to
    • Increased safety due to filter monitoring

    Download spec

  • Bohler Uranos 1700 AC/DC

    £2,500.00 (£3,000.00 inc. VAT)

    Key Features

    • Input Power: 110v / 240V Dual Voltage
    • Duty Cycle: 150A @ 60%
    • Output Range: 3-170 Amps
    • Weight: 18.8kg
    • Made in Italy
    • 3 Years Warranty (With an extra 2 on the more expensive bits)
    • Pulse Mode
    • Can be use for Mild Steel, Stainless Steel or Aluminium

    Download spec

    Available for immediate demonstration – Contact Harris Langfield on 01422 835388 or via email harris@langfieldwelding.com to arrange an on site demo – or to see the machine in action in our state of the art demonstration area in Halifax, West Yorkshire.

End of content

End of content